Dustproof equipment

PROFI series dustproof floor telecommunication cabinets are designed for installation of network, telecommunication, auxiliary mounting equipment of 19" standard inside office and industrial premises with a high degree of dustiness, presence of moisture and possibility of mechanical impact.

• Degree of protection - IP55
• Cold-rolled steel with thickness from 1 to 2 mm is used in the production of the cabinet. The front door of the cabinet can be metal with a 4 mm tinted glass panel (MG series) or all-metal (MF series). The rear door is all-metal in both series. The doors can be installed either on the left or right side of the cabinet. They are equipped with locks with a pressure mechanism for locking the door in the closed position (4 locking points). All openings are equipped with sealing contours. Side panels are removable, with four single-point locks on each and also equipped with sealing contours. Damping elements are used on all doors and walls. For cable entry, special ports of different sizes are provided at the base and top of the cabinet. All openings are sealed with rubber grommets. To prevent the ingress of liquids inside the cabinet, a false panel is installed on the roof.
• To provide air ventilation inside the cabinet, the inlet opening is located at the bottom of the rear door and is equipped with a removable filter with a protective grid. The ventilation opening is located in the roof of the cabinet and is also equipped with a removable filter. If required, optional fan modules can be installed in the roof and/or lower part of the door.
• The cabinet is mounted on 4 hinged adjustable supports, which makes it possible to operate it on uneven surfaces. Swivel castors can be installed (optional).
• The cabinets are delivered semi-assembled in a compact package consisting of 3 parts. Supply includes cabinet with fittings and a set of screws, washers and nuts for its assembly, 4 adjustable supports, cable glands, a set of ground wires, a filter in the roof of the cabinet, a filter in the rear door, self-adhesive seals, sealant.

Wall-mounted two-section cabinets of WALLBOX IP55 series are a solution for small telecommunication equipment. They are recommended for use in industrial premises with high content of dust, moisture and other non-aggressive contaminants.

• The cabinets are made in 19" standard. The main elements of two-section cabinets are a front door, a section with mounting rails and a rear section.
• The door has both right and left hinges, is equipped with a lock and can be either with an insert made of impact-resistant tinted glass or blank metal. The door opening angle is 180 degrees.
• The frame and rails of the main cabinet section are made of 1.2 mm steel. The cabinet frame is of all-welded construction. For equipment assembly the cabinet has two pairs of 19" profiles with depth adjustment, which allows to install rather heavy deep equipment in the cabinet.
• The rear section has a depth of 100mm, with right or left hinge. It is equipped with additional 19" profiles, which allows to place oversized equipment on 2 mounting points.
• All openings are equipped with sealing contours, damping elements are used on all doors and sections.
• To ensure air ventilation inside the cabinet, the input openings are located in the lower part (bottom) and are equipped with a removable filter with a protective grille. The ventilation opening is located in the roof of the enclosure and is also equipped with a removable filter. To prevent liquids from getting inside the cabinet, a false panel is installed on the roof. The design of the roof provides the possibility of installing fan modules for forced ventilation (optional).
• Cable entry is carried out through the bottom and side edges of the rear section through rubber sealing glands.
• All conductive parts of the cabinet are grounded.
• The cabinets are delivered assembled.