BASIC 2

Main purpose

Floor cabinet of BASIC.2 series of prefabricated and demountable design is aimed to accommodate telecommunication, server, cross-connect and other 19" equipment. Suitable for use in offices and technical rooms at temperatures from +5ºC to +40ºC and humidity not exceeding 80%.

Design features

Tinted glass 4 mm thick (for cabinets with a transparent insert in the front door).
All cabinet components are made of 1.2 mm thick steel.
Simple design with a minimum number of parts, which saves time and resources when assembling products.
Easily removable side and rear panels and front door for easy access to any part of the cabinet.
Interchangeable front door and rear panel with no additional structural modifications.
Tool-less front door relocation capability.
Removable rear panel on the door with no additional structural modifications.
Depth adjustment of 19" profiles by fixed positions, increasing the accuracy of installation. Adjustment step is 10 mm.
Installation of the cabinet on castors is possible only instead of adjustable feet.
To create a single circuit, all elements of the cabinet have grounding points (grounding kit is available separately).
Delivery of the cabinet in disassembled form in only 2 boxes, significantly reducing the cost of transportation.

#BBD0E0 »

Additionally, cabinets can be equipped with a variety of accessories (shelves, organizers, etc.).

Main purpose

Design features

Tinted glass 4 mm thick (for cabinets with a transparent insert in the front door).
All cabinet components are made of 1.2 mm thick steel.
Simple design with a minimum number of parts, which saves time and resources when assembling products.
Easily removable side and rear panels and front door for easy access to any part of the cabinet.
Interchangeable front door and rear panel with no additional structural modifications.
Tool-less front door relocation capability.
Removable rear panel on the door with no additional structural modifications.
Depth adjustment of 19" profiles by fixed positions, increasing the accuracy of installation. Adjustment step is 10 mm.
Installation of the cabinet on castors is possible only instead of adjustable feet.
To create a single circuit, all elements of the cabinet have grounding points (grounding kit is available separately).
Delivery of the cabinet in disassembled form in only 2 boxes, significantly reducing the cost of transportation.

#BBD0E0 »

BASIC 2

Buy

Out of stock

PRACTIC 3

Main purpose

19" floor cabinet of PRACTIC.3 series of prefabricated and demountable design is aimed to accommodate telecommunication, server, cross-connect and other 19" equipment. Suitable for use in offices and technical rooms at temperatures from +5ºС to +40ºС and humidity not exceeding 80%.

Climatic execution
UHL 4.2 according to GOST 15150.
Basic protection against dust and moisture.
IP20.
The product complies with the following standards: ANSI/TIA/EIA RS-31 0-D; IEC 297-2, DIN 41494-1, 7; ETSI.

Design features

Unified cabinet locks allow one key to open the doors.
Cabinets are equipped with 2-part hinged rear doors and easily removable side panels for convenience and to minimize service area.
Perforations in the front and rear doors ensure optimal ventilation of the installed equipment. The perforation rate exceeds 75 %.
The removable side panels are closed by locks recessed in the case, which makes it possible to install the cabinets in 1 row without removing them.
19" mounting profiles are installed on the side rails of the cabinet via box nuts in special slots, which allows precise depth adjustment of the profiles.
19" mounting profiles have unit markings, applied with special high-contrast paint, applied by silk-screening.
Vertical mounting plates are placed outside the unit space (available separately). Cables and equipment can be attached using screws and/or adhesive ties, as well as tool-less methods.
The rear frame of the cabinet provides tool-less mounting locations for the PDU so as not to occupy the usable depth of the cabinet.
Easy-to-remove plugs are provided in the roof and base for mounting cable glands as well as fan modules (available separately).
The cabinets are delivered disassembled in a flat cardboard box, which reduces transportation costs (optional delivery is possible assembled on a pallet).

Out of stock

WALLBOX, WALLBOX LIGHT, WALLBOX PRO

Main purpose

Universal prefabricated and demountable wiring closets of WALLBOX series are designed for wall mounting of telecommunication active and passive equipment inside residential, office and industrial premises.

The front door is metal with tinted glass (4mm) with a standard lock. The rear wall (door) is not installed. The side walls of the cabinet are removable, fixed on the base and locked with a lock. Access to this structure is from 3 sides: through the side panels and the door.

Profiles (both front and rear) can be adjusted in depth for convenience and optimization of equipment placement.

For cable entry there are special mounting ports in the base and roof of the cabinet, mounted on lintels. The cabinet is ventilated through special openings in the base and roof both directly and by means of additional installation of fan modules (optional). The delivery set includes anchor bolts for mounting the cabinet on the wall.

The cabinets are delivered semi-unassembled in a compact package.

Out of stock